Network Energy Solutions
CF4850T-2U
CF4850T-2U
Rated Capacity : 50Ah
Our state-of-the-art battery management system (BMS) integrates advanced intelligence to deliver unparalleled protection against overcharging, overdischarging, overcurrent, and temperature variations. With built-in alarm features and safety measures, our BMS ensures the highest level of safety and security.
Furthermore, our batteries offer a historical data storage capability that enables efficient monitoring and analysis. Our product stands out in delivering backup power supply for communication purposes, specifically designed for unique scenarios and high-rate discharge demands.
The exceptional performance and reliability of our batteries make them ideal for critical environments like data centers and communication centers, where they find extensive application.
Optimize for Power: Performance and Protection
Space-saving installations with hanging poles/walls/towers. Achieve rapid deployment and save 80% on installation time.
Good High Temperature Performance
Ambient temperature <38°C no need for air-conditioning cooling, saving energy.
Intelligent Protection
With voltage, current and temperature intelligent protection function.
Worry-Free
Long-Life Solutions
Streamlined Operation and Maintenance for Enhanced Efficiency.
Life Span
Easy Operation and Maintenance
Integrated BMS design, battery supports self-management SOC, SOH management and other functions
Anti-theft Function
Multiple anti-theft functions can be selected
Module Specification and Parameters
Connection method | 1P15S | 1P16S |
---|---|---|
Rated Energy | 2400Wh | 2560Wh |
Rated Capacity | 50Ah | 50Ah |
Rated Voltage | 48V | 51.2V |
Voltage Range | 42V-52.5V | 43.2V-56.8V |
Charging Current | 25A | 25A |
Discharging Current | 50A | 50A |
Charging Temperaure | 0 - 50°C | 0 - 50°C |
Discharging Temperaure | -20 - 55°C | -20 - 55°C |
Storage Temperaure | -30 - 45°C | -30 - 45°C |
Self-discharging Rate | ≤3% (0-30°C/3months) | ≤3% (0-30°C/3months) |
Dimension | 440×390×88mm (W*D*H) | 440×390×88mm (W*D*H) |
Weight | 24kg | 25.2kg |
Life Span | 3000 times @80%DOD, (0.5C/0.5C) | 3000 times @80%DOD, (0.5C/0.5C) |
Battery Management System
BMS Introduction
Communication Interface
RS485 / RS232 / CAN
Signal Acquisition Function
It has acquisitions of single voltage and external busbar voltage, battery module total voltage,charging/discharging current,surface temperature of battery cell, BMS board temperature for each series.
Battery Cell Equalization Function
The battery has a passive equalization function. When the cell voltage difference exceeds a certain value during charging, the equalization function will be started.
Charging Current Limit Function
It has the ability to automatically enter current-limiting charging when the battery is detected with low voltage, high voltage, low temperature, high temperature, poor consistency, or charging overcurrent protection.
Voltage Acquisition Accuracy
Current Acquisition Accuracy
Detection accuracy ≤ 1% (0.5C Charging / Discharging)
Anti-theft Function
Software anti-theft, communication anti-theft, gyroscope anti-theft and other functions
System Device Failure Alarm
It has failure detection and alarm function for key components of BMS board. While it is detected with temperature sensor failure, voltage detection failures, charge and discharge MOS failure, an alarm will be generated and the charge and discharge loops will be disconnected (if the charge and discharge loop is damaged, it is not required to disconnect), the battery cannot recover automatically, and all the indicators flash to prompt.
Histroical Storage Function
500 historical records, 10000 historical records and life-cycle storage are optional; Independent storage space; BMS has power failure preservation capability; Historical data records include battery voltage, current, ambient temperature, SOC, SOH, cycle times, cumulative discharge capacity and other data.