Network Energy Solutions
CF4810T-1U
Embedded series
CF4810T-1U
Rated Capacity : 10Ah
Experience the cutting-edge power of our state-of-the-art Battery Management System (BMS) – your ultimate protection against overcharging, overdischarging, overcurrent, and temperature fluctuations. With advanced intelligence and built-in alarms, our BMS ensures unmatched safety and security, giving you complete peace of mind.
But that’s not all. Our batteries go above and beyond with their comprehensive historical data storage capability.
Effortlessly monitor and analyze performance, making informed decisions for optimized efficiency. And when it comes to communication backup power supply, our product excels, meeting even the most demanding scenarios and high-rate discharge requirements.
Don’t settle for anything less when it comes to power management. Step into the future with our state-of-the-art BMS and superior batteries. Elevate your power capabilities today.
Optimize for Power: Performance and Protection
High temperature mastery up to 38°C sans air-conditioning, saving energy. Intelligent protection with voltage, current, and temperature safeguards for unparalleled performance.
Good High Temperature Performance
Ambient temperature <38°C no need for air-conditioning cooling, saving energy.
Intelligent Protection
With voltage, current and temperature intelligent protection function.
Worry-Free
Long-Life Solutions
Streamlined Operation and Maintenance for Enhanced Efficiency.
Life Span
3000 times @ 0.5C | 80%DOD,25°C
Easy Operation and Maintenance
Integrated BMS design, battery supports self-management SOC, SOH management and other functions
Anti-theft Function
Multiple anti-theft functions can be selected.
Module Specification and Parameters
Connection method | 1P15S | 1P16S |
---|---|---|
Rated Energy | 480Wh | 512Wh |
Rated Capacity | 10Ah | 10Ah |
Rated Voltage | 48V | 51.2V |
Voltage Range | 42V-52.5V | 43.2V-56.8V |
Charging Current | 5A | 5A |
Discharging Current | 10A | 10A |
Charging Temperaure | 0 - 50°C | 0 - 50°C |
Discharging Temperaure | -20 - 55°C | -20 - 55°C |
Storage Temperaure | -30 - 45°C | -30 - 45°C |
Self-discharging Rate | ≤3% (0-30°C/3months) | ≤3% (0-30°C/3months) |
Dimension | 440×350×44mm (W*D*H) | 440×350×44mm (W*D*H) |
Weight | 8kg | 8.3kg |
Life Span | 3000 times @80%DOD, (0.5C/0.5C) | 3000 times @80%DOD, (0.5C/0.5C) |
Battery Management System
BMS Introduction
Communication Interface
RS485 / RS232 / CAN
Signal Acquisition Function
It has acquisitions of single voltage and external busbar voltage, battery module total voltage,charging/discharging current,surface temperature of battery cell, BMS board temperature for each series.
Battery Cell Equalization Function
The battery has a passive equalization function. When the cell voltage difference exceeds a certain value during charging, the equalization function will be started.
Charging Current Limit Function
It has the ability to automatically enter current-limiting charging when the battery is detected with low voltage, high voltage, low temperature, high temperature, poor consistency, or charging overcurrent protection.
Voltage Acquisition Accuracy
Current Acquisition Accuracy
Detection accuracy ≤ 1% (0.5C Charging / Discharging)
Anti-theft Function
Software anti-theft, communication anti-theft, gyroscope anti-theft and other functions
System Device Failure Alarm
It has failure detection and alarm function for key components of BMS board. While it is detected with temperature sensor failure, voltage detection failures, charge and discharge MOS failure, an alarm will be generated and the charge and discharge loops will be disconnected (if the charge and discharge loop is damaged, it is not required to disconnect), the battery cannot recover automatically, and all the indicators flash to prompt.
Histroical Storage Function
500 historical records, 10000 historical records and life-cycle storage are optional; Independent storage space; BMS has power failure preservation capability; Historical data records include battery voltage, current, ambient temperature, SOC, SOH, cycle times, cumulative discharge capacity and other data.